With the continuous development of recycling technology, PE foam recycling has become possible. ADOS SARL, a partner of Intco GREENMAX, is engaged in the Fabricator industry in the south of France. The foam after cutting has various shapes and is widely used in manufacturing all kinds of packaging, but the EPE foam scraps produced during the cutting process have become a headache. How should these "white garbage" be disposed of? It is precisely because of this problem that ADOS SARL learned that Intco GREENMAX can help solve the problem of PE foam recycling through online search and contacted us proactively.

ADOS SARL has a history of more than 30 years. It mainly provides packaging (such as air transport boxes, medical equipment, electronic products, etc.) for the aviation, medical, and electronic industries. During the process of cutting EPE foam, there will be about 10-12 tons of scraps a year . The initial recycling plan was to ask the waste recycling center to help transport it away, and the cost was about 140 euros/ton. Not only that, but the company has to bear expensive shipping costs on its own. ADOS SARL wants to change the current payment solution, so as to achieve the effect of saving costs. At the same time, as the government departments pay more and more attention to environmental protection, and the requirements for waste disposal methods are becoming stricter, ADOS SARL is more urgent to find an economical and environmentally friendly PE foam recycling solution. When learned that GREENMAX densifier can be recycled, they showed great interest and contacted us in early 2022.

During the entire communication process, ADOS SARL learned that Intco GREENMAX has more than 15 years of experience in foam compression and has many successful cases for more complex materials such as EPE foam, so it has great trust in us. In fact, people in France prefer to use cold pressing technology for recycling, but according to the actual situation of the customer, we recommend him to use PE foam densifier. This GREENMAX densifier uses hot-melt technology, which can compress the EPE pearl cotton foam to the greatest extent. The ratio is about 90:1. After a field visit to Jiffy, another European customer of GREENMAX, ADOS SARL adopted GREENMAX's suggestion and purchased a PE foam densifier in April 2022, model M-C50E, to recycle the EPE scraps produced by the cutting process.

PE foam densifier M-C50E will be officially put into use in July 2022. GREENMAX personally visited ADOS SARL in France at the end of 2022. During the communication, the person in charge said that PE foam densifier successfully helped them solve all difficulties and save While avoiding high recycling and transportation costs, it also realizes the recycling of waste. So far, this device has been used well. ADOS SARL also said that this attempt at new technology really brought them a huge surprise.